What Are the Different Kinds of Restoration a Masonry Contractor Works On?
Masonry restoration work can be done on modern and historical buildings. The need for masonry repair can arise from different reasons from weathering and seismic movements to poor workmanship or just plain negligence. While the need for masonry restoration can often be seen, it is important to speak to a
about the extent of the damage, what caused it and how best to deal with it.
The type of masonry restoration will greatly depend on the age, type, condition, and location of a structure. Historical buildings will need to be handled more sensitively than most modern buildings. Structures that are in areas of high-risk seismic activities could have their own form of masonry repair policy.
The most common type of masonry restoration is repointing and tuckpointing. The two are often mistaken as being the same, however, there are subtle differences. Repointing is the filling in of the gaps due to damaged mortar joints, and tuckpointing involves replacing deteriorated mortar with new.
With both cases, the strength and look of old mortar must be considered when it comes to preparing the new mortar. The new mortar must be able to bond properly with all the old masonry units, and not put any stress on them which could result in them flaking or crumbling. The finished masonry work needs to have a consistent and aesthetically appealing appearance throughout.
Replacing and resettling masonry units are forms of masonry restoration which are done when any loose, fallen, broken or deteriorated units are present. Displaced or damaged units can be resettled in place with the aid of new mortar, or replaced with other old units. When similar old units cannot be found, then new ones which match the originals can be used instead. If you would like to know more about our
masonry contractor
and live in or around the Chula Vista, CA area, you should call us at Fermax Masonry Inc. today at (619) 367-5905.